High Quality for Small Road Grader - XCMG 4 ton Double Drum Road Roller XMR403 – China Construction

Introduction:

Product Detail

Product Tags

Feedback (2)

We not only will try our greatest to offer you excellent services to just about every client, but also are ready to receive any suggestion offered by our buyers for Crane Mobile, Welding Excavator Bucket Teeth, Track Excavator, The mission of our firm should be to provide the best high quality goods with finest price tag. We've been on the lookout forward to doing organization with you!

High Quality for Small Road Grader - XCMG 4 ton Double Drum Road Roller XMR403 – China Construction Detail:

Closed hydraulic drive system is adopted to realize step-less speed change.

Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.

The front vision of machine is less than 1×0.75 m, rear view without any shade, which provides drivers with a good sight range.

The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.

High frequency vibration and excitation force design, high working efficiency, good compaction effect.

Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.

Large ground clearance and curb clearance, strong traffic ability, good edge compaction performance.

This machine has also the air intake preheating function, can realize low temperature cold start.

Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ℃.

Item	Unit	XMR403
Operating mass	kg	4000
Static linear load (front drum/rear drum)	N/cm	157/157
Vibrational frequency	Hz	60
Amplitude	mm	0.41
Exciting force	kN	42
Vibrating drum (Diameter x width)	mm	800×1300
Theoretical gradeability	%	30
Operating speed	km/h	0~10.6
Wheel base	mm	1920
Steering angle	°	±30
Swing angle	°	±10
Minimum turning radius	mm	3062 / 4362
Minimum ground clearance	mm	348
Engine type		ZN490B
Rated power	kW	36
Rated speed	r/min	2600

Product detail pictures:

Related Product Guide:

Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for High Quality for Small Road Grader - XCMG 4 ton Double Drum Road Roller XMR403 – China Construction , The product will supply to all over the world, such as: Bangkok, Hamburg, Detroit, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.

Compact Motor Grader